Machine Cleaner / Degreaser – Techspray 1630-16S

Machine Cleaner / Degreaser – Techspray 1630-16S

Techspray 1630-16S Machine Cleaner / degreaser is 16 oz Aerosol Pack of  Blue Shower G3 designed for precision cleaning of polar and non-polar soils. Blue Shower G3 is effective in cleaning electronic and electrical equipment, machinery, metal parts and other general cleaning applications. Its Non-Ozone Depleting, Non-Flammable, Safe on Most Plastics, Rapidly Evaporating, Zero Residue.

This one of the best available maintenance cleaner cleans oil and contaminants off of metal parts, printed circuit boards, barcode instruments, switch boxes, gear boxes, and engines. G3 Blue Shower is patented non-flammable cleaner formulated to be powerful, yet economical. Eliminate brushing and scrubbing, saving time and materials.

Features & Benefits

  • Powerful cleaner
  • Non-flammable
  • Non-ozone depleting
  • Safe on electronics
  • Rapid evaporation
  • Zero residue
  • Safe on most plastics
  • EPA SNAP approved

How to Use This Cleaner / Degreaser

Disconnect the equipment from power source. Make sure opening of spray head is pointing toward surface to be cleaned. Hold the aerosol can 6-8 inches away. Direct spray to saturate soiled surface. Use an ESD-Safe cleaning brush to clean heavy soils. When used as a general cleaner, start at top of area to be cleaned using a sweeping motion and spray the area, slowly working toward the bottom. To clean in hard to reach areas, insert extension tube in sprayhead to direct spray. Allow components to dry completely before applying current.

  • Make: Techspray, USA
  • P/N: 1630-16S
  • Packaging: 16 oz = 473 ml

Note:

  1. Download the Datasheet / Brochure and MSDS (Material Safety Datasheet) from the Top Right Corner for details like Features, Specification, Safety Precautions and Application Instructions.
  2. To Know Price / Rate / Quotation and to buy this product, Please use the Online Enquiry Form. Please feel free to write an email to us or call us for any assistance.
Machine Cleaner / Degreaser – Techspray 1500

Machine Cleaner / Degreaser – Techspray 1500

Techspray 1500-QT is a powerful degreaser specially formulated using natural ingredients like citrus and soy oils to soak in and quickly cut through oil and grease. It is best suitable for cleaning tools, parts, shop equipment, motors, stainless steel surface and industrial working surfaces. Leaves high-gloss finish.

This machine cleaner / degrease is compliant with European REACH (Registration, Evaluation, Authorization & Restriction of Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive). It does not contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of Very High Concern) list substances, or halides.

Features & Benefits

  • Clean heavy oil & grease
  • Non-flammable
  • Non-ozone depleting
  • Concentrated and dillutable
  • Non-corrosive, moderate pH
  • Safe on most plastics and painted surfaces
  • Biodegradable

How to Use This Cleaner / Degreaser

Spray and saturate the soiled area. Let soak for 30-60 seconds depending on thickness of the grease. Using a lint-free wipe, wipe lightly at first to allow cleaning agent to break down residues. Continue to wipe in a circular motion until the grease or oil is fully removed. Repeat the process if required. On walking surfaces, mop thoroughly after cleaning. Material is easily rinsed by wiping with water dampened cloth.

  • Make: Techspray, USA
  • P/N: 1500-QT
  • Packaging: 1 qt = 0.95 Liter
  • Bulk Pack available on request.

Note:

  1. Download the Datasheet / Brochure and MSDS (Material Safety Datasheet) from the Top Right Corner for details like Features, Specification, Safety Precautions and Application Instructions.
  2. To Know Price / Rate / Quotation and to buy this product, Please use the Online Enquiry Form. Please feel free to write an email to us or call us for any assistance.
Stencil Cleaner – Techspray 1570

Stencil Cleaner – Techspray 1570

Techspray 1570-QT Stencil Cleaner is one of the best SMT Stencil Cleaners available today. It effectively removes all types of solder paste – water-­based, RMA, no-clean, lead-­free and uncured adhesive from screens, misprinted boards and equipment. It is completely safe on stencils, squeegees, and equipment surfaces.

This stencil cleaner is ideal replacement for IPA cleaners, which are often prohibited because of safety and environmental restrictions on VOC emissions or waste disposal issues.

Features & Benefits

  • Quickly clean paste or uncured adhesive
  • Non-flammable
  • Non-ozone depleting
  • Safe for stencils, tools, misprinted boards
  • Biodegradable
  • Low VOC, zero GWP

How to Use This Stencil Cleaner

Manual Stencil Cleaning: Spray and saturate area to be cleaned. Wipe gently at first to allow cleaning agent to break down paste or adhesive. Continue to wipe in a circular motion until remaining residues are fully removed. Replace wipe as it becomes overly saturated with the paste/adhesive or tattered. Dispose of soiled wipe appropriately depending on the type of solder paste/adhesive removed.

Underside Stencil Cleaning: Fill cleaner into designated reservoir of SMT printer. Keep adequate liquid level.

  • Make: Techspray, USA
  • P/N: 1570-QT
  • Packaging: 1 qt = 0.95 Liter
  • Bulk Pack available on request.
  • Suitable for Lead-Free

Note:

  1. Download the Datasheet / Brochure and MSDS (Material Safety Datasheet) from the Top Right Corner for details like Features, Specification, Safety Precautions and Application Instructions.
  2. To Know Price / Rate / Quotation and to buy this product, Please use the Online Enquiry Form. Please feel free to write an email to us or call us for any assistance.
Oven Cleaner – Techspray 1573

Oven Cleaner – Techspray 1573

Techspray 1573 Oven Cleaner is formulated to clean reflow oven, wave soldering machine, and associated heat exchanger systems by removing all types of flux residues including water-based flux, RMA Flux, No-clean Flux, lead-free etc. This machine cleaner must be used periodically to prevent maintenance and keep equipment performing at peak levels. It is fast acting and more effective than IPA for baked-on flux residues.

Features & Benefits

  • Quickly clean flux residue from oven & wave fingers
  • Non-flammable
  • Non-ozone depleting
  • Safe on warm ovens
  • Biodegradable

How to Use This Oven Cleaner

SMT Oven Cleaning: Allow the oven to cool down slightly and apply on warm surface (below 100°C). Spray oven cleaner to saturate the soiled area. Let soak for 5 minutes. Using a good quality lint-free wipe, wipe lightly at first to allow cleaning agent to break down residues. Continue to wipe in a circular motion until the flux residues are fully removed. Wipe completely with damp (w/water) cloth to remove remaining residue. Dispose off soiled wipe.

Wave Solder Finger Cleaning: Fill cleaner into finger cleaning reservoir. Keep adequate liquid level.

  • Make: Techspray, USA
  • P/N: 1573-QT
  • Packaging: 1 qt = 0.95 Liter
  • Bulk Pack available on request.
  • Suitable for Lead-Free

Note:

  1. Download the Datasheet / Brochure and MSDS (Material Safety Datasheet) from the Top Right Corner for details like Features, Specification, Safety Precautions and Application Instructions.
  2. To Know Price / Rate / Quotation and to buy this product, Please use the Online Enquiry Form. Please feel free to write an email to us or call us for any assistance.
Flux Remover – Techspray 1634-12S

Flux Remover – Techspray 1634-12S

Techspray 1634-12S is 12 oz G3 No-Clean Flux Remover / Cleaner / Defluxer is aerosol container. This No Clean Flux Remover is formulated to remove and clean any PCB (PC Board) with R, RA, RMA and SA type flux residues after high temperature reflow soldering. This flux remover can also be used as an all-purpose cleaner to remove light oils, silicones, waxes, greases and similar contaminants from Printed Circuit Board. It is Non-Ozone Depleting, Non-Flammable, Safe on Most Plastics. Rapidly Evaporating, Zero Residue.

Techspray 1634 Flux Remover / Defluxer is highly effective in removing remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards. Residues left behind from high temperature  lead-free are hard to clean. This one of the best available flux cleaner is highly effective at removing fluxes baked on at lead-free temperatures. Aerosol Pack and powerful spray helps to clean micro-components and fine pitch leads that are otherwise delicate and easily damaged by brushing and scrubbing The power of G3 is specially formulated to clean white residues left behind by no­clean fluxes.

Features & Benefits

  • Powerful cleaner
  • Non-flammable
  • Non-ozone depleting
  • Safe on electronics
  • Rapid evaporation
  • Zero residue
  • Safe on most plastics
  • EPA SNAP approved
  • Proven effective for lead-free processes

How to Use This Flux Cleaner

Defluxing / Flux Removal: Hold the Aerosol Container 15 to 20 cm away from the PCB making sure that the opening of sprayhead is pointing toward surface to be cleaned. Spray and clean using ESD-Safe Brush.

Maintenance cleaning: Disconnect the equipment to be cleaned from power source. Hold the aerosol can 6-8 inches away and make sure opening of spray head is pointing toward surface to be cleaned. Never hold the spray head towards yourself.  Direct spray to saturate soiled surface. Use any ESD-Safe Cleaning Brush to heavy soils. If you are using this cleaner as a general purpose cleaner, then start spraying from the top to bottom in a sweeping motion. Use extension tube in the sprayhead to clean hard to reach areas. Allow components to dry completely before applying current.

Cleaning Flat Surface: To clean any flat surface, saturate a good quality lint-free wipe or cloth. Clean the surface with this saturated wipe. Repeat if required.

  • Make: Techspray, USA
  • Packaging: 12 oz
  • Bulk Pack available on request.
  • Suitable for Lead-Free

Note:

  1. Download the Datasheet / Brochure and MSDS (Material Safety Datasheet) from the Top Right Corner for details like Features, Specification, Safety Precautions and Application Instructions.
  2. To Know Price / Rate / Quotation and to buy this product, Please use the Online Enquiry Form. Please feel free to write an email to us or call us for any assistance.
Flux Remover / Flux Cleaner – Techspray Precision-V Universal Cleaner 1651-16A

Flux Remover / Flux Cleaner – Techspray Precision-V Universal Cleaner 1651-16A

Techspray Flux Remover / Flux Cleaner – 1651-16S is 16 oz Aerosol Spray Container for PCB Cleaning. This PCB / Flux Cleaner is free from Nasty chemical like nPB, TCE, Perc.  It is Non-Flammable, Low VOC, Non-Ozone Depleting, Residue-Free, Rapid Evaporation, Safe on Most Plastics, Much Safer than nPB and TCE, RoHS Compliant, REACH Compliant. The chemical is best suitable for flux residual removal for electronic or electrical soldering. It is effective on both rosin and no-clean fluxes. It is also effective for lead and lead-free soldering processes and solder.

This Universal PCB Cleaner is ideal for aviation and other applications where strict VOC caps apply (based on EPA VOC exemptions). Bulk chemicals ideal for cold/bucket cleaning and ultrasonics (not intended for vapor degreaser).

Features & Benefits

  • Powerful PCB cleaner
  • Non-flammable
  • Non-ozone depleting
  • Safe on electronics
  • Rapid evaporation
  • Zero residue
  • Safe on most plastics
  • EPA SNAP approved
  • Low VOC

How to Use This Flux Cleaner

Maintenance cleaning: Disconnect the equipment to be cleaned from power source. Hold the aerosol can 6-8 inches away and make sure opening of spray head is pointing toward surface to be cleaned. Never hold the spray head towards yourself.  Direct spray to saturate soiled surface. Use any ESD-Safe Cleaning Brush to heavy soils. If you are using this cleaner as a general purpose cleaner, then start spraying from the top to bottom in a sweeping motion. Use extension tube in the sprayhead to clean hard to reach areas. Allow components to dry completely before applying current.

Defluxing / Flux Removal: Hold the Aerosol Container 15 to 20 cm away from the PCB making sure that the opening of sprayhead is pointing toward surface to be cleaned. Spray and clean using ESD-Safe Brush.

Cleaning Flat Surface: To clean any flat surface, saturate a good quality lint-free wipe or cloth. Clean the surface with this saturated wipe. Repeat if required.

  • Make: Techspray, USA
  • Packaging: 16 oz
  • Bulk Pack available on request.
  • Suitable for Lead-Free

Note:

  1. Download the Datasheet / Brochure and MSDS (Material Safety Datasheet) from the Top Right Corner for details like Features, Specification, Safety Precautions and Application Instructions.
  2. To Know Price / Rate / Quotation and to buy this product, Please use the Online Enquiry Form. Please feel free to write an email to us or call us for any assistance.