Hot Air SMD Rework System with in-built Vacuum – Goot XFC-200

Hot Air SMD Rework System with in-built Vacuum – Goot XFC-200 : Goot XFC-200 Hot Air SMD Rework Station

Goot XFC-200 is a Analog SMD Rework Station with Close Loop Temperature Control. This is one of the best economical semi-automatic Hot Air SMD Rework Station available today. The inbuilt Vacuum System helps rework and repairing of any SMD without any damage to the SMD Components, Surrounding Components or the PCB. The station is equipped with state-of-art Low Heat Absorption Technology and Perfect Thermodynamic Nozzle design. The station is best suitable for any Mobile Phone Repairing, Motherboard Repairing and any other PCB with Surface Mount Electronic Components.

Make: Goot, Japan

Note: Nozzles are sold separately. Please select nozzles as per your requirement and application.

Features
– Hot Air SMD Rework System
– Easy to Use
– Handles QFP, PLCC, SOL.
– Ergonomic Design Prevents fatigue
– In Built Vacuum
– Close Loop Control
Vacuum Pick-UpHighly accurate
Flow Meter Easy air-flow control
Auto Cool-DownProtects the heater
Specification
Model XFC-100 XFC-110 XFC-210 XFC-300 XFC-301
Voltage 220–240V AC 50/60Hz 220V, 230V, 240V AC 50/60Hz 220–240V AC 50/60Hz
Power Consumption 420–470W, 380–420W 470W 400–460W
Power Cord Length 1.1m (3 core cord) ground plug 1.5m Inlet type
Temperature Setting Range 150–450°C 150–550°C 50–550°C
Insulation Resistance Over 10MΩ (500V DC)
Station Unit
Model XFC-100 XFC-110 XFC-210 XFC-300 XFC-301
Output Voltage 220–240V AC 220V, 230V, 240V AC 220–240V AC
Air flow Meter Equipped
Air flow Volume 5–20L /min 5–25L /min 5–23L /min 5–25L /min
Auto-lift function Included
Modes 1 (Hand) 3 (Profile-Flat, Profile-Slope, Hand) 3 (Profile-Normal, Profile-Auto, Hand)
Temperature Profiles 5 Zones (Temperature and Time)
Profile Memory ( Flat,Slope)×19, HAND×1 ( Auto, Normal )×19, HAND×1
Dimensions 107(W) ×177(H)×227(D)mm 182(W) ×179(H)× 263(D)mm 200(W) ×230(H) ×265(D)mm
Weight 4.6kg ( w/o cord ) 7.8kg ( w/o cord ) 8.4kg ( w/o cord ) 7.6kg ( w/o cord )
Accessory Handpiece Holder Handpiece Holder, XVCW-SET Connection Cable with Preheater, Handpiece Holder, XVCW-SET
Handpiece Unit
Model XFC-100 XFC-110 XFC-210 XFC-300 XFC-301
Voltage 220-240V AC 220V, 230V, 240V AC 220-240V AC
Power Consumption 300-400W 400W 370-430W
Heater Nichrome Heater
Hose length between Handpiece and Control
Unit
1m
Vacuum Pickup Integrated into Handpiece
Length 220mm (w/o cord)
Weight 180g (w/o nozzle, cord)

Note:

  1. Download the Catalog from the Top Right Corner for details like, features, specification, Desoldering Nozzles and Other Replacement Parts.
  2. To Know Price / Rate / Quotation and to buy this product, Please use the Online Enquiry Form. Please feel free to write an email to us or call us for any assistance.

Other Products Offered in this category