High Wattage Soldering Station – Goot RX-852AS

High Wattage Soldering Station – Goot RX-852AS

Goot RX-852AS is a High-Wattage (150 Watt) ESD Safe Temperature Controlled Soldering Station that offers fast heating and excellent thermal recovery. This station can easily, quickly and conveniently solder any composition of lead-free solder alloy including Tin/Silver/Copper.

The melting point of leaded solder (solder wire with lead) is less than melting point of lead-free solder wire. Hence, a lead-free soldering station must be of higher wattage for fast heating and fast thermal recovery.

The Goot RX-852AS lead free soldering station takes just few seconds to reach the set temperature.

Make: Goot, Japan

Packing List:

  • Station Unit, Soldering Iron (RX-85GAS / Tip is not included). Please select the desired tip at the time of placing Purchase Order.
  • Soldering Iron Stands (ST-21), Brass Wool & Sponge, Power Cord.

Features

Excellent Heat Recovery – Excellent heat recovery has been achieved by combining a 150W compact high-output heater with a high-sensitivity sensor.
Fastest in Its Class – Reaches 350°C in only 14 seconds. (Only 6 seconds when using RX-80HRT tips.)
Light and Compact Soldering Iron Handpiece – Same size as the RX-80GAS.
Tip Replacement without Tools – Slide-change tip. Easy to replace a hot tip without any other tools.
Thick Tip Coating for Lead-free Soldering – All tips have extra-thick iron plating, to resist erosion by lead-free solder.
– More than 40 tips are available, including the RX-80HRT tips.

Specification

Model RX-852AS
Voltage 110–120V, 220–240V AC 50/60Hz
Power Consumption 145–170W
Power Cord Length 1.5m inlet type
Temperature Setting Range 50–450°C
Ripple Temperature ±5˚C (unloaded)
Insulation Resistance Over 100MΩ (500V DC)
Accessories Soldering Iron Stand (ST-21)
Control Unit
Output Voltage 24V AC
Dimensions 116(W) × 105(H) × 194(D)mm
Weight 4.8kg
Soldering Unit
Voltage / Consumption 24V AC / 150W
Ground Resistance Less than 2Ω
Leak Voltage Less than 2mV
Heater Nichrome heater
Cord Length 1.5m
Length 174mm  (with RX-85HRT-5D)
Weight 39g  (with RX-85HRT-5D)

Note:

  1. Download the Catalog from the Top Right Corner for details like, features, specification, Soldering Tips and Replacement Parts.
  2. To Know Price / Rate / Quotation and to buy this product, Please use the Online Enquiry Form. Please feel free to write an email to us or call us for any assistance.
Lead-Free Soldering Station – Goot RX-802AS

Lead-Free Soldering Station – Goot RX-802AS

The RX-802AS Temperature Controlled Soldering Station from Goot, Japan, is best suitable for any lead-free soldering job. This station can easily, quickly and conveniently solder any composition of lead-free solder alloy including Tin/Silver/Copper.

The melting point of leaded solder (solder wire with lead) is less than melting point of lead-free solder wire. Hence, a lead-free soldering station must be of higher wattage for fast heating and fast thermal recovery.

The Goot RX-802AS lead free soldering station takes just 6 seconds to reach the set temperature.

Make: Goot, Japan

Packing List:

  • Station Unit, Soldering Iron (RX-80GAS / Tip is not included). Please select the desired tip at the time of placing Purchase Order.
  • Soldering Iron Stands (ST-21), Brass Wool & Sponge.

 Features:

Excellent Heat Recovery – There is almost no temperature fluctuation during continuous operation. Good for lead-free soldering.
Fastest in Its Class – Reaches set temperature in just 6 seconds after turning power on.
Tip Replacement without Tools – Slide-change tip. Easy to replace a hot tip without any other tools.
Reduced Grip Heat – Patented thermal-insulation grip permits comfortable and safe work.
Thick Tip Coating for Lead-free Soldering – All tips have extra-thick iron plating, to resist erosion by lead-free solder.

Specification:

Model RX-802AS
Voltage 220V, 230V, 240V AC 50/60Hz
Power Consumption 80W
Power Cord Length 1.2m
Temperature Setting Range 50–450°C
Ripple temperature ±5˚C (unloaded)
Insulation Resistance Over 100MΩ (500V DC)
Accessories Soldering Iron Stand (ST-21)
Control Unit
Output Voltage 24V AC
Dimensions 115(W) × 98(H) × 146(D)mm
Weight 1.8kg
Soldering Unit
Voltage / Consumption 24V AC / 72W
Ground Resistance Less than 2Ω
Leak Voltage Less than 2mV
Heater Nichrome heater
Cord Length 1.2m
Length 158mm (with RX-80HRT-MB)
Weight 28g (with RX-80HRT-MB)

Note:

  1.  Download the Catalog from the Top Right Corner for details like, features, specification, Soldering Tips and Replacement Parts.
  2. To Know Price / Rate / Quotation and to buy this product, Please use the Online Enquiry Form. Please feel free to write an email to us or call us for any assistance.