Goot XFC-210 is a Digital SMD Rework Station with Close Loop Temperature Control. This is one of the best economical semi-automatic Hot Air SMD Rework Station available today. The inbuilt Vacuum System helps rework and repairing of any SMD without any damage to the SMD Components, Surrounding Components or the PCB. The station is equipped with state-of-art Low Heat Absorption Technology and Perfect Thermodynamic Nozzle design. The station is best suitable for any Mobile Phone Repairing, Motherboard Repairing and any other PCB with Surface Mount Electronic Components.
Make: Goot, Japan
Note: Nozzles are sold separately. Please select nozzles as per your requirement and application.
Features | |||||
– 5 zone profiles available: PREHEAT 1, PREHEAT 2, PREHEAT 3, REFLOW, and COOL. Up to 19 profiles* can be saved for each of the 5 zones. One profile can be registered for HAND Mode. | |||||
– Accurate P temperature control. Heater and Vacuum switches located on the handpiece for easy control. | |||||
– Handles QFP, PLCC, SOL. | |||||
– ON/OFF interface with Preheater (connection cable optional). Keypad lock and Offset functions. lInstant cool down on all zones by pressing the COOL key. | |||||
– In Built Vacuum | |||||
– Various Profiles Available – Up to 19 profiles, each with 5 zones | |||||
– Individual profiles with specific temperature and time settings can be pre-programmed for each of the 5 Zones | |||||
– Accurate Temperature Control – With PID control | |||||
– Forced Cool-Down – On all zones with cool key | |||||
Specification | |||||
Model | XFC-100 | XFC-110 | XFC-210 | XFC-300 | XFC-301 |
Voltage | 220–240V AC 50/60Hz | 220V, 230V, 240V AC 50/60Hz | 220–240V AC 50/60Hz | ||
Power Consumption | 420–470W, 380–420W | 470W | 400–460W | ||
Power Cord Length | 1.1m (3 core cord) ground plug | 1.5m Inlet type | |||
Temperature Setting Range | 150–450°C | 150–550°C | 50–550°C | ||
Insulation Resistance | Over 10MΩ (500V DC) | ||||
Station Unit | |||||
Model | XFC-100 | XFC-110 | XFC-210 | XFC-300 | XFC-301 |
Output Voltage | 220–240V AC | 220V, 230V, 240V AC | 220–240V AC | ||
Air flow Meter | – | Equipped | |||
Air flow Volume | 5–20L /min | 5–25L /min | 5–23L /min | 5–25L /min | |
Auto-lift function | – | Included | |||
Modes | 1 (Hand) | 3 (Profile-Flat, Profile-Slope, Hand) | 3 (Profile-Normal, Profile-Auto, Hand) | ||
Temperature Profiles | – | 5 Zones (Temperature and Time) | |||
Profile Memory | – | ( Flat,Slope)×19, HAND×1 | ( Auto, Normal )×19, HAND×1 | ||
Dimensions | 107(W) ×177(H)×227(D)mm | 182(W) ×179(H)× 263(D)mm | 200(W) ×230(H) ×265(D)mm | ||
Weight | 4.6kg ( w/o cord ) | 7.8kg ( w/o cord ) | 8.4kg ( w/o cord ) | 7.6kg ( w/o cord ) | |
Accessory | Handpiece Holder | Handpiece Holder, XVCW-SET | Connection Cable with Preheater, Handpiece Holder, XVCW-SET | ||
Handpiece Unit | |||||
Model | XFC-100 | XFC-110 | XFC-210 | XFC-300 | XFC-301 |
Voltage | 220-240V AC | 220V, 230V, 240V AC | 220-240V AC | ||
Power Consumption | 300-400W | 400W | 370-430W | ||
Heater | Nichrome Heater | ||||
Hose length between Handpiece and Control Unit |
1m | ||||
Vacuum Pickup | – | Integrated into Handpiece | |||
Length | 220mm (w/o cord) | ||||
Weight | 180g (w/o nozzle, cord) |
Note:
- Download the Catalog from the Top Right Corner for details like, features, specification, Desoldering Nozzles and Other Replacement Parts.
- To Know Price / Rate / Quotation and to buy this product, Please use the Online Enquiry Form. Please feel free to write an email to us or call us for any assistance.